Home/Catalogue/SCSJ-III 15 / SCSJ-III 30

Water purifiers

Laboratory Water Purifier SCSJ-III 15 SCSJ-III 30

SCSJ-III 15 / SCSJ-III 30

Purified-water production for analytical workflows and laboratory preparation.

Made to orderPrice on request
Manufacturer
BIOBASE
Request a quote
Reply within 24 hoursValidated selection and configurationDelivery across mainland Portugal, Madeira, the Azores, and all European countries.

01 / Key features

Key features

  • Continuous purified-water production
  • Quality selected by application
  • Output-parameter monitoring

02 / LaboratoriX technical datasheet

LaboratoriX technical datasheet

Technical parameters consolidated from the manufacturer documentation. Each column corresponds to one model; shared values are clearly identified. Final configuration, accessories, power supply and applicable documentation are confirmed with the quotation.

ParameterSCSJ-III 15SCSJ-III 30
Display
Common to all modelsLCD
Water Output Type
Common to all modelsRO and DI water
Water Output Speed15L/H30L/H
Purifying Procedure
Common to all modelsPF+AC+RO+DI
Water Supply Requirement
Common to all modelsTap water: TDS<200ppm, 5~45°C, 1.0~4.0Kgf/cm² (If inlet TDS>200ppm, extra pretreatment filter is recommended)
Purification System
Common to all modelsPretreatment Unit · Folded composite filter element*1 Active carbon filter *1 · Folded composite filter element*1 Active carbon filter *1
Purification System (2)
Common to all modelsRO Unit · 100GPD RO membrane*1 · 200GPD RO membrane*1
Purification System (3)
Common to all modelsSubsequent Unit · Deionization purification column(imported resin)*2 · Deionization purification column(imported resin)*3
Pure Water Quality
Common to all modelsIon Rejection Rate · 97%~99%(New RO membrane) · 97%~99%(New RO membrane)
Pure Water Quality (2)
Common to all modelsOrganic Rejection Rate · >99%, when MW>200 Dalton · >99%, when MW>200 Dalton
Pure Water Quality (3)
Common to all modelsParticles and Bacteria Rejection Rate · >99% · >99%
Pure Water Quality (4)
Common to all modelsResistivity · 15~18.2MΩ・cm · 15~18.2MΩ・cm
Pure Water Quality (5)
Common to all modelsConductivity · 0.055~0.067μs/cm · 0.055~0.067μs/cm
Control System
Common to all modelsAutomatic electronic pressure sensor controlling, RO membrane auto flushing, Automatic stop when water supply shortage, Automatic stop when water tank full, Automatic cutting off water when pump stop, 24 hours non-stop work
Flow Rate
Common to all models2.0L/min(when there is water in the water tank)
Water Quality Monitor
Common to all modelsTDS/conductivity test pen
Consumption
Common to all models72W
Power Supply
Common to all modelsAC220V, 50/60Hz; AC110V, 50/60Hz
Standard Configuration
Common to all modelsMain body(include 1 set of purification column), 15L water tank, TDS/conductivity test pen, accessory pack
External Size(W*D*H)
Common to all models410*220*420mm
Package Size(W*D*H)
Common to all models600*490*580mm
Gross Weight
Common to all models35kg

MADE-TO-ORDER SUPPLY

Do you need this equipment?

Share the application, configuration, quantity and delivery location. We prepare a tailored proposal with the required documentation.

Request a quote