Home/Catalogue/D-160/5 / D-160/10

Sample preparation

Homogenizer D-160

D-160/5 / D-160/10

Sample preparation, homogenisation, concentration and processing before analysis.

Made to orderPrice on request
Manufacturer
BIOBASE
Request a quote
Reply within 24 hoursValidated selection and configurationDelivery across mainland Portugal, Madeira, the Azores, and all European countries.

01 / Key features

Key features

  • Reproducible sample preparation
  • Configurations for different volumes
  • Integration with downstream analytical steps

02 / LaboratoriX technical datasheet

LaboratoriX technical datasheet

Technical parameters consolidated from the manufacturer documentation. Each column corresponds to one model; shared values are clearly identified. Final configuration, accessories, power supply and applicable documentation are confirmed with the quotation.

ParameterD-160/5D-160/10
Item No.80141110008014121000
Recommended ConfigurationD160 drive, H370 stand, DS-160/5 shaft, volumes from 0.1~50mlD160 drive, H370 stand, DS-160/10 shaft, volumes from 1~250ml
Speed Range
Common to all models8000~32000rpm
Max. Circum. Speed
Common to all models6.3~14m/s
Speed Control
Common to all models10 stage
Working Volume(H2O)
Common to all models0.1~50ml(Dispersing shaft DS-160/5)
Max. Viscosity
Common to all models5000mPa·s
Material of Dispersing Shaft
Common to all modelsSS316&PTFE seal ring
Noise
Common to all models≤72dB
Ambient Temp.
Common to all models0~40°C
Relative Humidity
Common to all models85%RH
Protection Type
Common to all modelsIP20
Consumption
Common to all models160W
Motor Type
Common to all modelsAC carbon brush motor
Power Supply
Common to all modelsAC110/220V±10%, 50/60Hz(Customizable)
Standard Accessory
Common to all modelsBase stand+DS-160/5 dispersing shaft
External Size(W*D*H)
Common to all models45*55*190mm
Package Size(W*D*H)
Common to all models470*240*250mm
Gross Weight
Common to all models4kg
Cat. No.
Common to all modelsCombination Stator+Rotor · Model · Working Volume(ml) · Diameter of Stator · Diameter of Rotor · Min./Max. Immersion Depth · Application
18900543
Common to all modelsDS-160/5 · D-160/5 · 0.1~50 · 5mm · 3mm · 7/50mm · Small amounts of solid-liquid mixtures
18900544
Common to all modelsDS-160/10 · D-160/10 · 1~250 · 10mm · 6mm · 10/120mm · Small amounts of solid-liquid mixtures

MADE-TO-ORDER SUPPLY

Do you need this equipment?

Share the application, configuration, quantity and delivery location. We prepare a tailored proposal with the required documentation.

Request a quote