50 and 100 L biological fermentation systems

Name: 50 and 100 L biological fermentation systems BK-BR50 / BK-BR100
Brand: BIOBASE
SKU: BK-BR50

BK-BR50 / BK-BR100

Controlled fermentation and culture for bioprocess development and optimisation.

Made to orderPrice on request

Manufacturer: BIOBASE

Request a quote

Reply within 24 hoursValidated selection and configurationDelivery across mainland Portugal, Madeira, the Azores, and all European countries.

01 / Key features

Key features

Agitation and temperature control
Culture-parameter monitoring
Configuration for process development

02 / LaboratoriX technical datasheet

LaboratoriX technical datasheet

Technical parameters consolidated from the manufacturer documentation. Each column corresponds to one model; shared values are clearly identified. Final configuration, accessories, power supply and applicable documentation are confirmed with the quotation.

Parameter	BK-BR50	BK-BR100
Tank Structure — Capacity	50L	100L
Tank Structure — Sterilization Method	Common to all modelsIn-place sterilization
Tank Structure — Design Pressure	Common to all models0.3Mpa
Tank Structure — Working Pressure	Common to all models≤0.15Mpa
Tank Structure — Inner Material	Common to all models316 stainless steel
Tank Structure — Interface	Common to all modelsAir inlet, exhaust port, temperature probe port, PH probe port, DO interface, defoaming interface, flame protection inoculation port, feeding port, discharge port, jacket upper and lower port, etc
Tank Structure — Polishing	Common to all modelsInternal Polishing Accuracy: RA0.4 External Polishing Accuracy: RA0.6
Coefficient of Charge	Common to all models60%~80%
Aspect Ratio	Common to all models1:2~2.5
Jacket	Common to all modelsDesign Pressure: 0.3Mpa Material: 304 stainless steel Used for temperature control and auxiliary sterilization.
Intake Filtration	Common to all modelsMaximum Ventilation: 1.5VVM, precision 0.01μm sterilization filter
Motor — Power	Common to all models1500W
Motor — Speed	Common to all models50~700rpm continuous stable adjustable
Motor — Control Accuracy	Common to all models±0.5%* Max Speed
Motor — Resolution	Common to all models1rpm
Stirring System	Common to all modelsTop mechanical stirring system, stainless steel with special heat treatment for mixing shaft, adjustable mixing blade is adopted, with six straight blades in 1 gear and inclined blades in 1 gear pressure turbine, the three-stage pressure type efficient defoaming paddle is set up with a baffle plate, and the intake air is set up with a ring distributor, and the gas-liquid two phases are fully mixed to improve the dissolved oxygen
Sterile Air Handling System — Air Pre-filter	Filtration Capacity: 0.1m³/min Accuracy: 0.1μm Membrane Filtration	Filtration Capacity: 0.2m³/min Accuracy: 0.1μm Membrane Filtration
Sterile Air Handling System — Air Fine Filter	Filtration Capacity: 0.1m³/min Accuracy: 0.01μm Membrane Filtration	Filtration Capacity: 0.2m³/min Accuracy: 0.01μm Membrane Filtration
Sterile Air Handling System — Steam Filtration System	Common to all modelsStainless steel shell, PTFE filter element, membrane filtration, filtration accuracy is 5μm.
Sterile Air Handling System — Air Decompression and Oil-water Separator	Common to all modelsReduce the air pressure from the air compressor to 0.2-0.25Mpa, with an oil-water separator to remove oil and water in the air.
Temperature Control System — Measuring Range	Common to all models0~150℃
Temperature Control System — Control Range	Common to all modelsWater temperature in tank~65℃
Temperature Control System — Control Accuracy	Common to all models±0.5℃
Temperature Control System — Resolution	Common to all models0.1℃
PH Control System — Control Mode	Common to all modelsAutomatic
PH Control System — Display Range	Common to all models0~14PH
PH Control System — Control Range	Common to all models2~12PH
PH Control System — Resolution	Common to all models0.01PH
Pressure and Flow Detection Control System	Common to all modelsφ60 surface pressure gauge indicates pipe, tank and jacket pressure, manual control tank pressure, measuring range is 0~0.4Mpa;glass rotor flow meter manually control the intake air flow;one-way check valve is added on the pipeline to prevent material back flow from polluting the filter.
DO Control System — Control Mode	Common to all modelsAutomatic
DO Control System — Display Range	Common to all models0~100%, 0~150%
DO Control System — Accuracy	Common to all models±0.1%, 1%
DO Control System — Testing Content	Common to all modelsThe DO value is detected online
Feeding System	Common to all modelsManual and automatic control, peristaltic pump flow, equipped with replenishing bottle, the program can set the amount of flow per unit time and accumulate online measurement, equipped with 1L flow refill bottle
Defoaming System — Control Accuracy	Common to all models10~100000Ω
Defoaming System — Control Content	Common to all modelsFoam abnormal condition alarm, automatic intermittent processing
Speed Control System	Common to all modelsSpeed: 50~700rpm±1%, stepless frequency conversion speed regulation
Standard Accessories	Common to all modelsFermentation Tank1, Air compressor1, Air tank1, Steam generator1
Power Supply	AC220V, 50/60Hz(Standard); AC110V, 50/60Hz(Optional)	AC380V, 50/60Hz
Net Weight — Tank	185kg	362kg
Net Weight — Air Compressor and Steam Generator	175kg	214kg
Package Size(LWH) — Tank	*13508201750mm*	*15208202230mm*
Package Size(LWH) — Air Compressor and Steam Generator	*135011001100mm*	*137011701130mm*
Gross Weight — Tank	210kg	392kg
Gross Weight — Air Compressor and Steam Generator	200kg	244kg

MADE-TO-ORDER SUPPLY

Do you need this equipment?

Share the application, configuration, quantity and delivery location. We prepare a tailored proposal with the required documentation.

Request a quote

50 and 100 L biological fermentation systems

Key features

LaboratoriX technical datasheet

Do you need this equipment?

Related equipment

Biological Fermentation System BK-BR10